Fluke 107 Palm-sized, CAT III Digital Multimeter
Key features
- CAT III 600 V safety rated
- 6000 counts
- Basic DC accuracy ±0.5%
- AC/DC current, AC/DC Voltage, Resistance, Capacitance, Frequency (107 only) measurement
- Diode (107 only) and continuity test with buzzer
- Large easy to read backlit display (107 only)
- Small lightweight design – easy to carry in pocket
- Rugged, Reliable, Accurate readings
- Long battery life with auto power OFF
- 1 year Fluke India warranty
Included accessories
- TL75 Test leads
- 2 AAA Batteries [installed]
- User manual
- Statement of calibration practices
Product details
Product overview: Fluke 107 Palm-sized, CAT III Digital Multimeter
The Fluke 107 is a compact, palm size easy-to-use digital multimeter made to fit the way you work. It is the perfect first-pass troubleshooting tool; small enough to fit in a shirt pocket yet tough enough to withstand daily use, including a 1-meter drop test. For everyday applications where true-rms accuracy isn’t needed, the Fluke 107 delivers reliable measurements time after time. With a CAT III 600 V safety rating, you don’t need to compromise safety. The Fluke 107 offers a comfortable grip, weighs only 200 g, and is easy to carry.
Fluke 107 measurement test functions
- AC and DC voltage
- AC and DC current
- Resistance
- Capacitance
- Diode
- Frequency and duty-cycle
Fluke 107 comes ready to work
The Fluke 107 comes with a TL75 Hard Point™ Test Lead Set. It’s one pair (red, black) of 48 inch (1.22 meter) test leads with right-angle, shrouded banana plugs. The meter also includes a SmartStrap™ intelligent magnetic multi-purpose lanyard that lets you hang the Fluke 107 from any ferrous surface or support the meter at an angle for easy viewing.
Specifications
Specifications: Fluke 107 Palm-sized, CAT III Digital Multimeter
Accuracy is available for one year after calibration, operating from 18 °C to 28 °C and relative humidity from 0% to 75%. The format of the accuracy specification is: ± ([% of reading] + [least significant digit])
| Precision specifications | ||||
| AC voltage (40 Hz to 500 Hz)1 |
Range | Resolution | Accuracy | |
| 6.000 V 60.00 V 600.0 V |
0.001 V 0.01 V 0.1 V |
1.0 % + 3 | ||
| DC voltage | 6.000 V 60.00 V 600.0 V |
0.001 V 0.01 V 0.1 V |
0.5 % + 3 | |
| Exchange millivolts | 600.0 mV | 0.1 mV | 3.0 % + 3 | |
| Diode test2 | 2.000 V | 0.001 V | 10 % | |
| Resistance (ohm) |
400.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ |
0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ |
0.5 % + 3 0.5 % + 2 0.5 % + 2 0.5 % + 2 0.5 % + 2 1.5% + 3 |
|
| Capacitor3 | 50.00 nF 500.0 nF 5.000 μF 50.00 μF 500.0 μF 1000 μF |
0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μF 1 μF |
2 % + 5 2 % + 5 5 % + 5 5 % + 5 5 % + 5 5 % + 5 |
|
| Frequency4 Hz (10 Hz – 100 kHz) |
50.00 Hz 500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHz |
0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz |
0.1 % + 3 | |
| Duty cycle4 | 1 % to 99 % | 0.10 % | 1 % typical case5 | |
| AC current (40 Hz - 200 Hz) |
4.000 A 10.00 A |
0.001 A 0.01 A |
1.5 % + 3 | |
| DC | 4.000 A 10.00 A |
0.001 A 0.01 A |
1.5 % + 3 | |
|
||||
| Features | Overload protection | Input impedance (nominal value) | Common mode rejection ratio | Normal mode rejection ratio |
| AC voltage | 600 V 1 | >10 MΩ <100 pF 2 | >60 dB at 50 Hz or 60 Hz at DC current | − |
| Exchange millivolts | 600 mV | >1M, <100 pF | >80 dB at 50 Hz or 60 Hz | − |
| DC voltage | 600 V 1 | >10 MΩ <100 pF | >100 dB at 50 Hz or 60 Hz at DC current | >60 dB at 50 Hz or 60 Hz |
|
||||
| General technical indicators | ||||
| The highest voltage applied to any terminal and ground | 600 V | |||
| Display (LCD) | 6000 counts, updated three times per second | |||
| Type of battery | Two AAA batteries (NEDA 24A, IEC LR03) | |||
| Battery life | At least 200 hours | |||
| Temperature | ||||
| Operating temperature | 0 °C to 40 °C | |||
| Storage temperature | -30 °C to 60 °C | |||
| Relative humidity | ||||
| Working humidity | No condensation below 10 °C ≤ 90 % at 10 °C to 30 °C; ≤ 75 % at 30 °C to 40 °C |
|||
| Working humidity, 40 MΩ range | ≤ 80 % at 10 °C to 30 °C; ≤ 70 % at 30 °C to 40 °C | |||
| Altitude | ||||
| Working elevation | 2000 m | |||
| Storage altitude | 12,000 m | |||
| Temperature coefficient | 0.1 X (specified accuracy) / °C (<18 °C or >28 °C) | |||
| Current input fuse protection | 11A, 1000V fast-melting type, must use Fluke designated parts | |||
| Volume (height x width x length) | 142 mm x 69 mm x 28 mm | |||
| Weight | 200 g | |||
| Protection level | IEC 60529: IP 40 | |||
| Safety | IEC 61010-1: 600 V CAT III, pollution degree 2 | |||
| Electromagnetic environment | IEC 61326-1: Portable | |||
| Electromagnetic compatibility | Applicable only in Korea. Class A equipment (industrial broadcasting and communication equipment)1 | |||
| 1 This product meets the requirements of industrial (Class A) electromagnetic wave equipment, which should be noted by the seller or user. The device is suitable for use in a work environment, not a home environment. | ||||
Shipping and Returns
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
Fluke
There are no question found.
Rating & Review
There are no reviews yet.